Industry-Trusted & Family-Owned for 45 Years
Fast, Reliable Shipping
The 3M DBI-SALA ExoFit X50 Cross-Over Climbing & Positioning Safety Harness combines the attachment points needed for several common work-at-height applications with the streamlined design of 3M's ExoFit X50 harness platform.
Designed for industrial and occupational fall protection, this configuration provides front, back, and side/hip D-ring attachment points. The dorsal back D-ring provides the primary fall-arrest connection, the front attachment point supports appropriate climbing applications, and the hip positioning D-rings allow connection to compatible positioning equipment. 3M identifies these attachment-point functions across its full-body harness guidance.
The ExoFit X50 platform emphasizes straightforward operation without sacrificing important fall-protection features. An automatic stand-up dorsal D-ring helps make overhead and personal SRL connections easier to access, while a self-locking dorsal pad helps prevent the D-ring from sliding down the worker's back.
Another significant feature is the integrated personal SRL adapter. Rather than requiring a traditional web-mounted adapter, compatible personal self-retracting lifelines can be connected directly to the integrated adapter. 3M states this design can reduce installation time by up to 55% compared with web-mounted installation.
High-visibility yellow-green webbing improves visibility on the jobsite, while integrated low-profile suspension trauma straps, auto-resetting lanyard keepers, and RFID identification add practical functionality for professional fall-protection programs.
Workers who climb and perform positioning work need more from a harness than a single dorsal fall-arrest connection.
The ExoFit X50 climbing/positioning configuration provides multiple connection points so the same harness can support several functions within an appropriate complete fall-protection system.
For fall arrest, the dorsal D-ring provides the primary connection location commonly used with energy-absorbing lanyards and self-retracting lifelines.
For climbing, the front attachment point allows connection to compatible ladder-climbing and vertical fall-protection systems when permitted by the complete system.
For work positioning, hip D-rings allow compatible positioning equipment to support a worker at the work location, helping free both hands to perform the task. 3M specifically identifies hip positioning D-rings for this purpose.
This versatility makes the harness particularly attractive to workers whose job requires transitioning between climbing, fall-arrest, and positioning activities.
Connecting a lanyard or personal SRL can be more difficult when the dorsal D-ring falls flat against the worker's back.
The ExoFit X50 addresses this with an automatic stand-up dorsal D-ring, helping keep the attachment point accessible for efficient connections.
A self-locking dorsal pad also helps minimize movement of the D-ring down the worker's back.
The ExoFit X50 incorporates an integrated personal self-retracting lifeline adapter.
This allows compatible personal SRLs to be attached without relying on conventional web-mounted installation methods. According to 3M, the design can reduce installation time by up to 55% compared with web-mounted installation.
This is an especially valuable feature for contractors and industrial safety programs using personal or twin-leg SRLs as their primary connecting subsystem.
One of the strongest features of this ExoFit X50 configuration is its range of attachment points.
| Attachment Point | Typical Function |
|---|---|
| Back / Dorsal | Fall Arrest |
| Front | Ladder Climbing / Applicable Climbing Systems |
| Side / Hip | Work Positioning |
3M notes that back D-rings are used for fall arrest, front D-rings distinguish climbing-oriented harness configurations, and hip positioning rings are intended for use with positioning devices.
Always use each attachment point only for applications specifically permitted by 3M's instructions and the applicable complete fall-protection system.
The ExoFit X50 incorporates low-profile suspension trauma straps between the harness webbing.
The integrated configuration helps protect the straps against jobsite wear while reducing potential contact and entanglement with surrounding equipment and the work environment.
Following a fall arrest, suspension trauma straps can help a suspended worker assume a more supportive position while awaiting rescue when deployed according to the manufacturer's instructions.
Each ExoFit X50 incorporates 3M Connected Safety ID (RFID) technology.
The integrated identification feature can simplify equipment inventory, inspection, and record-management processes for organizations managing larger fall-protection fleets.
This is particularly useful for contractors, utilities, industrial facilities, and organizations that need to track individual harnesses through recurring inspection programs.
3M lists the broader ExoFit X50 platform for applications including climbing, construction, positioning, mining, retrieval, rigging, and wind energy, depending on the specific harness configuration.
| Specification | Details |
|---|---|
| Manufacturer | 3M™ |
| Brand | DBI-SALA® |
| Product Series | ExoFit™ X50 |
| Product Type | Full-Body Safety Harness |
| Harness Style | Cross-Over |
| Primary Applications | Climbing / Positioning / Fall Protection |
| Back D-Ring | Yes |
| Front Attachment | Yes |
| Side / Hip D-Rings | Yes |
| Dorsal D-Ring | Automatic Stand-Up |
| Dorsal Pad | Self-Locking |
| Webbing | High-Visibility Yellow-Green |
| Personal SRL Adapter | Integrated |
| Suspension Trauma Straps | Integrated |
| Lanyard Keepers | Auto-Resetting |
| Equipment Identification | 3M Connected Safety ID / RFID |
| Intended Use | Industrial / Occupational |
The ExoFit X50 family is available in multiple configurations and sizes, so size-specific manufacturer part numbers and buckle configurations should be maintained at the variant level in BigCommerce rather than assigning one MPN to the entire product family.
This configuration is designed primarily for climbing, work positioning, and fall-protection applications where multiple harness attachment points are needed.
Yes. The ExoFit X50 features an automatic stand-up dorsal D-ring designed to make connections easier and more efficient.
A front attachment point can be used with compatible ladder-climbing and other approved climbing systems. 3M identifies a front D-ring as a distinguishing feature of its ladder-climbing harness configurations.
The side or hip D-rings are designed for work positioning with compatible positioning equipment. Positioning systems can support a worker at the work location so both hands can be used to perform a task.
The ExoFit X50 incorporates an integrated personal SRL adapter designed to make compatible personal SRL installation faster and easier. 3M states that it can reduce installation time by up to 55% compared with web-mounted installation.
Yes. The X50 platform incorporates low-profile suspension trauma straps between the harness webbing.
Yes. 3M Connected Safety ID (RFID) is integrated into the harness to help simplify inventory, inspection, and equipment record management.
No. 3M specifies the ExoFit X50 for industrial and occupational use and states that it is not intended for consumer sale or use.
3M DBI Sala
3M DBI Sala
3M DBI Sala
3M DBI Sala
3M DBI Sala
