Item Number | TX2-4G011
Tango TX2 Two Gas Detector, Nitrogen Dioxide (0 to 150 ppm in 0.1 ppm increments) and Carbon Monoxide LOW (For High H2 Environments)
Protect workers, reduce false alarms, and spend less time managing your gas detector fleet. The Tango TX2 uses individual sensors to increase alarm accuracy so you can reduce unnecessary shutdowns and improve incident data quality. A two-year runtime from a single, replaceable battery eliminates the need for charging.
Features:
- Three strobe-emitting visual alarm LEDs (two red; one blue) 100 decibel (dB) audible alarm at a distance of 10 cm (3.94 in); Vibration alarm
- Polycarbonate with a protective rubber overmold
- Segment liquid crystal display (LCD)
- Lightweight and hassle-free design
- Warranted for as long as the instrument is supported by Industrial Scientific Corp. (excludes sensors, batteries, and filters).
- Two year warranty on sensors.
- Battery: 3.6 V Primary lithium-thionyl chloride (Li-SOCl2); 1.5AH, 2/3AA; replaceable; non rechargeable.
- Dimensions: 99 x 51 x 35 mm (3.9 x 2.0 x 1.4 in)
- Temperature range: -40 °C to 50 °C (-40 °F to 122 °F) **
- Certifications:
Directive or CB Area Classification Standards
ATEX1: Ex ia I Ma;
Ex ia IIC T4 Ga; Equipment Group and Category: I M1 and II 1G,
EN 60079-0: 2012
EN 60079-11: 2012
EN 50303: 2000
IECEx3 Ex ia I Ma, Ex ia IIC T4 Ga
IEC 60079-0: 2011
IEC 60079-11: 2011
UL (C-US)4: Class I, Groups A, B, C, and D; Class II, Groups E, F, and G; T4; Exia Class I, Zone 0, AEx ia IIC T4
UL 913 8th Ed.
UL 60079-0 6th Ed.
UL 60079-11 6th Ed.
CSA C22.2 No. 157
Download Product Manual
Download Specification Sheet
