RKI’s Model EC-600 is an indoor, standalone monitor that detects Carbon Monoxide (CO) with a range of 0-150 ppm with 1 ppm increments. It’s sleek, low-profile design is equipped with a unique tri-color display, which changes color as Carbon Monoxide levels reach each alarm level. This version operates at 115 VAC. The EC-600 has two preset alarms, and comes ready to operate with a simple wall mount bracket and 10 foot power cord in its AC version. If Carbon Monoxide is present, the user is notified by an audible alarm tone and the multicolored LED digital display. The EC-600 uses a fast responding low-cost plug-in style electrochemical sensor. This long life sensor is field replaceable with no special tools required. The sensor can also be remotely mounted with an optional remote sensor cable.
- Compact, wall mounting design
- Highly visible 3 color LED digital display
- Power cable can enter from any direction
- Stores alarm summary data
- Built in audible and visual alarms
- 115 VAC operation
- Relay outputs for annunciation of alarms
- Low cost plugin electrochemical sensor
Specifications:
Model: EC-600
Measuring Gas: Carbon monoxide (CO)
Sampling Method: Diffusion
Physical Dimensions: 95(W) x 135(H) x 35(D)mm
Weight Approx. 420g (Approx. 220g in case of DC 24V version)
Display: 3 digits, 3 color LED (Green, Orange, Red) Normal: Green
Mounting: Wall mounting type (by using accessory mounting plate or mount at one switch box) Cable inlet: Up, down and left/right, or rear side
Environmental: Operating Temp 0-40ºC (0 to 104ºF)
Relative: Humidity below 90% RH (non-condensing)
Sensors: Sensor Types Electrochemical
Measuring: Ranges 0-150ppm (1ppm / digit)
Outputs: Type of Alarms Gas alarm: 2 level alarm (Latched mode / cancelled by reset switch)
Trouble alarm: Sensor connection trouble (Non-latched mode)
Preset Alarm Levels 1st: 50 ppm, 2nd: 100 ppm
Relays AL1 / AL2 Form A common, contact capacity: 125V 1A (Resistive load)
Visual 1st Alarm: Flashing orange LED with gas display
AL1 LED orange color flashing, intermitted buzzer sound
2nd Alarm: Flashing red LED gas display
AL2 LED red color flashing, intermittent buzzer sound
Trouble Alarm: Red flashing display “D-**” (**shows error No), short intermittent buzzer sound
Power AC 115V 50/60Hz, Power consumption: Max 3.5VA, Power cable: 3m accessory (standard)
Option: (DC 24V, Power consumption: MAX 2.0 W<Special version>)
Warranty One year materials and workmanship
PRODUCT MANUAL
PRODUCT DATASHEET
