MSA V-Gard H2 Vented Full Brim Safety Helmet with Mips, ANSI Type II, Class C, Ratchet Suspension

A Type II Safety Helmet with a full brim for increased sun protection. The latest innovation in Type II, Class C head protection

The V-Gard H2® Full Brim Safety Helmet provides enhanced head protection in a comfortable, easy to use application. This Safety Helmet is customizable and integrates seamlessly with a comprehensive suite of V-Gard® accessories for use in a wide variety of industrial applications.

• ANSI/ISEA Z89.1 Type II certification with integrated chinstrap for enhanced protection against lateral impacts, including during slips, trips & falls
• Mips Safety System for rotational impact protection to reduce the risk of traumatic Brain injury resulting from slips, trips and falls.
• 4-Point Chinstrap with multiple adjustment points for customized fir and comfort; EN12492 compliant.
• Vented for improved air flow, cooling and reduced heat stress.
• Extensive accessory compatibility with nearly all V-Gard H1 and V-Gard accessories for a wide variety of industrial applications and easy integration with existing inventory
• Quick and easy customization with thousands of existing logos, easy creation of new logos, and reflective stripes
• Comfortable ratchet suspension that’s easily adjustable with a gloved hand,
• Standard 6½"–8" (53–63 cm head circumference)
• Antimicrobial treatment of sweatband, crown pad & ratchet pad with Ionic+® high purity silver to eliminate odor-causing bacteria
• Integrated headlamp strap clips for easy & secure donning & doffing of lights on the helmet
• ANSI/ISEA Z89.1-2014 (R2019), Type II, Class C, HT,  HV (if applicable)
• Weight of Vented Helmet with Mips: 1.15 lbs

On April 12, 2024, the Occupational Safety and Health Administration (OSHA) issued an updated version of its “Head Protection: Safety Helmets in the Workplace” Safety and Health Information Bulletin (SHIB). OSHA recognizes two Types (impact) and three Classes (electrical) of head protection.

These include:

Type I head protection offering protection from impacts to the top of the head.
Type II head protection offering protection from impacts to the top and sides of the head.
Class G (General) head protection designed to help reduce exposure to low voltage conductors and proof tested at 2,200 volts (phase to ground).
Class E (Electrical) head protection designed to help reduce exposure to higher voltage conductors and proof tested at 20,000 volts (phase to ground).
Class C (Conductive) head protection which is not intended to provide protection against contact with electrical hazards.

The Safety and Health Information Bulletin  also notes that accessories including chinstraps, face shields, eye protection, and hearing protection may also be considered to address specific jobsite and application hazards.

Care & Maintenance

• Clean helmet assembly regularly with MSA’s Confidence Plus Cleaning Solution (P/Ns 10009971) or mild soap (no detergents) and warm water 
• Do not throw, drop, use as support or abuse helmet to ensure proper working condition
• Store helmet in clean, dry environment, 5-35°C (41-95°F)

Service Life Guidelines

• V-Gard Helmets are made with high-quality, wear-resistant materials. 
• Inspect the helmet before and after each use and replace any part(s) as required. 
• Always replace the helmet after it has withstood an impact or penetration.
• Storage Life is 2 years from date of manufacture when stored as directed. Storage beyond 2 years should be deducted from Service Life.
• Maximum service life: 5 years
• Warranty: 1 year from date of purchase (free from manufacturer’s defects)
• Please consult user instructions for additional details.